Blog·25 October 2026·5 min read

DDP Image for CD: What Labels Need Before Pressing

For labels and artists pressing an EP or album on CD: what a DDP image for CD holds, what to send before it is made, and how to check it before the plant.


A DDP image for CD is the set of files a replication plant uses to press your disc: the audio, the track starts, the gaps between songs, the codes, and a checksum that proves nothing changed on the way. If your EP or album is coming out on CD, the plant asks for this, not a folder of WAVs. Getting it right depends mostly on decisions you make before mastering ends. Here is what goes into one, what to send me, and how to check it before it leaves your hands.

What a DDP Image for CD Actually Holds

DDP stands for Disc Description Protocol. Instead of a burned disc that could carry scratches or write errors, you send a small folder of files. One holds the whole program as a single continuous audio stream. Others describe where each track starts and ends, the pause before each one, and the codes that travel with the disc. A checksum file lets the plant confirm that every byte arrived exactly as it left.

The audio is at CD resolution, 16-bit and 44.1 kHz. So the CD gets its own version, made from the same masters as your streaming files. The music doesn't change. What changes is the format and how the tracks meet each other inside one continuous program.

The Decisions That Belong to You

The people who know the record make most of the decisions in a DDP image. The gaps between songs come first. On a CD the silence between tracks is part of the listening, and a default gap rarely suits a record that was sequenced with care. Some songs should land right after the last note of the one before. Some need room to breathe. If you have already worked out your order, the article on how to sequence album tracks covers the listening side. The DDP is where those choices become fixed.

Then come crossfades and continuous runs. Two tracks might run into each other, as on a live jazz record or an EDM EP mixed as one set. The track marker then has to sit where a listener who skips ahead lands somewhere sensible, ideally on a downbeat, with no click. That is a listening decision more than a technical one, and I'd rather we talk it through than guess.

The codes are the third part. Each track can carry an ISRC, the code that identifies the recording, and the disc can carry its UPC or EAN barcode. These should match the codes your distributor uses for the digital release, so the CD and the streams point to the same recordings. CD-Text is optional: it holds the artist name and titles that some players display. It's worth adding, and spelling matters, because a typo here is pressed into every copy.

What to Send Me Before the Image Is Made

  • The final running order, with every title spelled exactly as it should appear.
  • The ISRC for every track and the UPC or EAN for the release, from your distributor or label.
  • How each transition should feel: a normal gap, a short gap, or straight into the next song.
  • Any hidden track, intro tucked before the first track marker, or index point you want to keep.
  • Whether you want CD-Text, and the artist name exactly as it appears on the sleeve.

I master your EP or album through one analog chain, and the DDP is made from the approved masters. Two revisions are included on every master, from the same mix. It's much easier to settle a gap or a title at that stage than after the plant has the file. A new mix is a new master, so wait until the mixes are truly final before the CD work starts.

How to Check a DDP Before It Goes to the Plant

Don't send a DDP you haven't heard. Ask for something you can listen to, either a DDP player that reads the image or the audio rendered from it. Play the whole thing top to bottom, the way someone holding the disc would. Listen to every transition. Gaps that look fine as numbers can feel long or abrupt once you hear them in a row.

Then skip. From the start of the disc, jump to every track and check that each one begins where it should, with no clipped first note and no tail of the previous song bleeding in. On continuous records, skip into each marker a few times. Read the titles, the artist name and the codes against your release sheet, line by line. A wrong digit in an ISRC is the kind of mistake that follows a recording around long after release.

Last, the checksum. A DDP player or the plant will verify it. If the check fails, the image was damaged in transfer and should be sent again, never repaired by hand. Send the folder as it is, zipped if needed, with nothing renamed inside it.

CD and Digital From the Same Masters

The CD and the streaming release should sound like the same record, whether it's hip-hop, rock or world music. Both come from the same masters, and the differences are only in delivery: format, gaps, codes on the disc. If you're preparing both at once, read the common digital delivery mistakes alongside this one, because names, versions and codes need the same care on both. For what comes with a stereo master on the digital side, see stereo master delivery.

A CD is the one version of your record that can't be updated once it's pressed. That is why the DDP exists: what you approved is what ends up on every copy. The goal isn't to change your mix, it's to make it the same, only better. On a disc, that means the music, the silences and the names all arrive exactly as you meant them.


Tell me about your record. One fixed price within one business day. Ask for a quote

← All posts

Newsletter

The Journal, in your inbox

New writing on mastering, roughly once a month. No pitches, no noise.